Hangzhou Xingguan Machinery Co., Ltd

Professional Wire Machinery Supplier in China

Home > News > Content
Zinc Wire Tin Zinc Aluminium Use And Maintenance
- Jul 22, 2017 -

Zinc Wire Tin Zinc Aluminium Use And Maintenance

Aluminum wire Drawing machine-wire drawing machine use and maintenance: 1, wire drawing machine matching die, according to the requirements of mold die, the aluminum wire diameter should be given necking, so that the wire diameter smoothly through the mold, after the wire diameter through the film, put the thread into the wire-drawing pliers, the mold to the first 1th-point drawing machine silk mother seat, from the other end of the wire-drawing rope hanging on the small hole in the drawing pot, the point of the pedal switch, so that the drawing pot. After drawing several laps, remove the lead pliers, and then start the No. 1th machine, so that no. 1th machine wiredrawing pot on more than half of the wire-drawing semi-finished, and then the aluminum thread through the hanging wheel, over the line to introduce 2nd machine. 2, according to the requirements of the second Die necking die, the point of drawing, to this cycle, so that wire drawing through multi-channel mold, traction to the receiving line wheel, start the receiving line machine, start the drawing process. 3. Turn the switch knob to the linkage start switch knob and the Receiving line button, adjust the variable frequency potentiometer speed knob, adjust the torque motor Controller knob, make the motor at the same time speed, so that the normal operation of wire drawing. Use speed to achieve the best match effect.Zinc Wire Tin Zinc Aluminium


Wire drawing type is mainly used for fine wire (wire diameter is less than or equal to O. 8mm) because the filament rigid small, push the process is easy to deformation, difficult to push silk. Wire drawing machine and wire plate are installed in the torch, due to the small wire feeding force, so often choose about 10W small motor. The wire tray capacity is approximately o. 7. Nevertheless, the wire drawing torch is still heavier. It can be seen that the wire drawing ensures the stability of the wire feeding, but the welding torch is heavier, which increases the labor intensity of the welder.Zinc Wire Tin Zinc Aluminium


Wire drawing machine [aluminum line]-the use and maintenance of wire drawing machine 1, wire drawing machine matching mold, according to mold die-piercing requirements, the aluminum line diameter should be given shrinkage, so that the wire diameter smoothly through the mold, after the wire diameter through the film, put the thread into the wire-drawing pliers, the mold to the first 1th-point drawing machine silk mother seat, from the other end of the wire-drawing rope hanging on the small hole in the drawing pot, the point of the pedal switch, so that the drawing pot. After drawing several laps, remove the lead pliers, and then start the No. 1th machine, so that no. 1th machine wiredrawing pot on more than half of the wire-drawing semi-finished, and then the aluminum thread through the hanging wheel, over the line to introduce 2nd machine.2, according to the requirements of the second Die necking die, the point of drawing, to this cycle, so that wire drawing through multi-channel mold, traction to the receiving line wheel, start the receiving line machine, start the drawing process. 3. Turn the switch knob to the linkage start switch knob and the Receiving line button, adjust the variable frequency potentiometer speed knob, adjust the torque motor Controller knob, make the motor at the same time speed, so that the normal operation of wire drawing. Use speed to achieve the best match effect.Zinc Wire Tin Zinc Aluminium


Hangzhou Xingguan Machinery Co., Ltd

Add:NO.619, Zilin Road, Fuchunjiang Town, Tonglu County, Zhejiang, China, 311504

Con:Chen Hu

Tel:86-571-64662028

Fax:86-571-64662277

Pho:86-13867129219

E-mail:osm@ztxg.com